With nearly 10 years of experience in exporting post-modern lighting products, quality has always been the core of our factory. For years, we mainly connected with customers through exhibitions. Now, to adapt to the global digital trend, we are expanding customer development channels to social media platforms including LinkedIn and Facebook.

1. High luminous efficiency of LED light source

Comparison of luminous efficiency: incandescent lamp efficiency is 10-15 lm, halogen tungsten lamp efficiency is 12-24 lumens/watt, fluorescent lamp 50-90 lumens/watt, sodium lamp 90-140 lumens/watt, most of the power consumption becomes heat loss.

LED light efficiency: can be sent to 50-200 lumen/watt, and good monochromism, narrow spectrum, without filtering, can directly emit colored visible light.

2. Low power consumption of LED light source

The power of single LED transistor is 0.03-0.06 W, driven by DC, and the driving voltage of single LED transistor is 1.5-3.5 V. Current 15-18 mA reflects fast and can be operated at high frequencies. When used in the same lighting effect, the power consumption is one ten thousandth of an incandescent lamp and one half of a fluorescent tube. Japan estimates that if the light efficiency of LED is twice higher than that of fluorescent lamp instead of half of the incandescent lamp and fluorescent lamp in Japan, it can save 6 billion litres of crude oil per year, and a fluorescent lamp with the same effect can save more than 40 watts. The power of each LED is only 18 watts.

3. Long service life of LED light source

Incandescent lamp, fluorescent lamp and halogen tungsten lamp adopt the characteristics of electronic light field radiation, filament burning easily, thermal deposition and light attenuation, while LED lamp is small in size, light in weight, encapsulated in epoxy resin, can withstand high-strength mechanical impact and vibration, is not easy to break, the average life of LED lamp is 30-50,000 hours, and the service life of LED lamp can reach 3-5 years, which can greatly reduce the maintenance cost of lamps and avoid. The pain of changing lights often.

4. Safety and reliability

Low calorific value, no thermal radiation, cold light source, safe touch, can accurately control the light type and luminous angle, light color and, no glare, no mercury, sodium elements and other substances that may endanger health.

5. LED light source is beneficial to environmental protection

LED is a kind of all-solid light-emitting material, which is impact-resistant and not easy to break, waste can be recycled, no pollution can reduce the production of harmful gases such as sulfur dioxide and nitride, and carbon dioxide to improve people's living environment. It can be called "green lighting source".

There are three kinds of white LED technology at present: one is to use the principle of three primary colors and the three kinds of ultra-high brightness LEDs, red, green and blue, which can be produced, to mix into white according to the ratio of 3:1:6 of light intensity; the other is to use the ultra-high InGan blue LED with a little yttrium diamond pomegranate as the main phosphor, which can generate yellow-green light under blue light excitation, and this yellow-green light can also photosynthesize with the translucent blue light. White light, three kinds of non-ultraviolet LED, using ultraviolet excitation trichrome phosphor or other phosphors, to produce a multi-color mixture of white light.

6. LED light source is more energy-saving

Of course, energy-saving is the main reason why we consider using LED. Perhaps LED is more expensive than traditional light sources, but it takes one year to save energy to recover the investment of light sources, so as to achieve a net energy-saving cap period of several times per year in 4-9 years.

Life

Constant current source drive is the best way to drive the LED. Constant current source drive is adopted. It does not need series current limiting resistors in the output circuit. The current flowing through the LED is not affected by external power supply voltage changes, ambient temperature changes, and the discreteness of LED parameters. Therefore, the constant current can be maintained and the excellent characteristics of the LED can be fully developed.

The constant current power supply of LED is used to supply power to the LED lamps. Because the current flowing through the LED is automatically detected and controlled during the power supply operation, there is no need to worry about excessive current flowing through the LED when the power is switched on, nor about short circuit burning out the power supply under load.

Lamp housing

LED lamp has the characteristics of high efficiency, environmental protection and long life. But common people will find that because of the brightness of the LED, it is easy to make the light energy into heat energy, which makes the LED lamp very hot. At this time, if the LED can not heat as soon as possible, its life will be greatly reduced.

Many LED manufacturers use aluminium shell for LED lamps. Aluminum shell is easy to heat dissipation, exquisite appearance, light weight, many high-end electronic products are made of aluminum shell. For example, the company's "Mac Pro" high-end computer series uses an all-aluminium case, which makes it easy for laptops to heat up, so that computers don't even need fans.

The use of aluminium shell can increase the life of the lamp core and make the LED lamp look beautiful. But the aluminium lamp cup is expensive, and the production cost is very high. The lamp cup needs to be processed by lathe. Therefore, some high-quality, medium-quality LED lamps will use aluminum lamp housing.

Another common LED lamp shell is a plastic shell. Because of the low cost of plastic shell, some low-end LED lamps will use plastic shell. But plastic shells are not easy to heat, and when plastic is heated, it is easy to melt and sublimate to produce harmful gases. So no plastic case is used in Europe, North America or Japan. Due to the large demand for cheap LED lamps in some parts of the country, plastic case sales in China are very large.

1. Energy saving: The energy consumption of white LED is only 1/10 of incandescent lamp and 1/4 of energy saving lamp.

2. Longevity: Lifetime can reach more than 100,000 hours. Lighting for ordinary families can be described as "once and for all".

3. It can work at high speed: if the energy-saving lamp is frequently turned on or off, the filament will turn black and quickly break down, so it is safer.

4. Solid-state packaging, which belongs to the type of cold light source. So it's good for transportation and installation. It can be installed in any miniature and enclosed equipment without fear of vibration.

5. The LED technology is progressing rapidly. Its luminous efficiency is making an amazing breakthrough, and its price is also decreasing. The era of a white LED entering the family is rapidly approaching.

6. Environmental protection, no harmful substances of mercury. The assembly parts of the LED bulb can be easily disassembled and assembled, and can be recovered by others without the need for manufacturer's recycling.

7. Light distribution technology makes LED point light source expand to surface light source, enlarge luminous surface, eliminate glare, sublimate visual effect and eliminate visual fatigue.

8. Integrated design of lens and lampshade. The lens has the functions of focusing and protecting, avoiding the repeated waste of light, and making the product more concise and beautiful.

9. High-power led planar cluster packaging and integrated design of radiator and lamp holder. It fully guarantees the heat dissipation requirement and service life of led, fundamentally meets the arbitrary design of the structure and shape of LED lamps, and has the distinct characteristics of LED lamps.

10. Significant energy saving. With ultra-high brightness and high power LED light source and high efficiency power supply, it can save more than 80% electricity than traditional incandescent lamp, and its brightness is 10 times of that of incandescent lamp at the same power.

11. The super-long life is more than 50,000 hours, which is more than 50 times of the traditional tungsten filament lamp. The high reliable advanced packaging technology - eutectic welding is adopted for LED, which fully guarantees the long life of LED.

12. No stroboscopic. Pure DC operation eliminates the visual fatigue caused by stroboscopic light source.

13. Green environmental protection. It does not contain lead, mercury and other polluting elements, and does not pollute the environment.

14. Shock resistance, strong lightning resistance, no ultraviolet (UV) and infrared (IR) radiation. No filament and glass shell, no traditional lamp tube fragmentation problem, no harm to human body, no radiation.

15. Working under low thermal voltage, safe and reliable. Surface temperature is less than 60 C (ambient temperature Ta = 25 C).

16. Wide voltage range, universal LED lamp. 85V-264VAC full voltage range constant current ensures that life and brightness are not affected by voltage fluctuation.

17. Adopting PWM constant current technology, it has high efficiency, low heat and high constant current precision.

18. Reduce line losses and make the power grid pollution-free. Power factor (> 0.9), harmonic distortion (< 20%) and EMI meet the global target, which reduces the power loss of power supply lines and avoids high frequency interference pollution to power grid.

19. General standard lamp head can directly replace existing halogen lamp, incandescent lamp and fluorescent lamp.

20. The luminous visual efficiency can be as high as 80 lm/w. The color temperature of various LED lamps is optional, the color rendering index is high and the color rendering performance is good.

Obviously, as long as the cost of LED lamp decreases with the development of LED technology. Energy-saving lamps and incandescent lamps will inevitably be replaced by LED lamps.

More and more attention has been paid to energy saving and environmental protection of lighting, and the use of LED lamps has been vigorously promoted.

Advantages and disadvantages

* If the heat dissipation is not good, the service life will be greatly shortened.

* Low-end LED lamps are still less energy-saving than energy-saving lamps (cold cathode tube, CCFL).

* The initial purchase cost is higher.

* Because of the strong directionality of LED light source, special optical characteristics of LED should be considered in lamp design.

Below for neon and LED lights related comparison, add the latest LED technology to compare, not before you see in the network that information.

1. Does the LED light source have a life of 100,000 hours?

According to the light attenuation rate of 7%, the actual time is only about 50,000 hours. According to the light attenuation of 3%, the actual application can reach 80,000 hours.

2. Does LED not heat?

Yes, heat dissipation is required.

3. Can LED replace incandescent lamp?

Luminous flux, light efficiency and color rendering are acceptable, but they are too expensive and will not decrease in recent years. But the cost of replacing incandescent lamps can be reduced by increasing the luminous flux of the product.

4. Can LED be simply used as a common light source?

No, power supply, optical LED lamp and heat conduction are needed.

5. Performance and advantages comparison of two light sources

The advantages of neon light have been covered by LED, but the price of LED light is too high.

6. Power Supply Comparison of Two Light Sources

The low voltage of LED is good, but the load current is too large. The input current of large particle 1W single LED lamp is 350mA.

7. Controlling Technology Comparison of Two Light Sources

LED is easy to implement, but neon lamp is mature.

8. Stability comparison of two light sources

LED is inconsistent, neon lamp is quite stable. A few manufacturers can achieve relative stability, such as using CREE and AOD chips to combine the advantages of their respective chips.

9. Price comparison of two light sources

LED is more expensive, but yellow and red are comparable. The main price is white LED.

10. Comparison of Outdoor Use of Two Light Sources

LED lights can be completely waterproof and dustproof.

11. Comparison of Two Light Source Markets

The annual output value of global lighting products is US$42 billion (US$15 billion in China). The proportion of LED light sources is less than 1%.

Characteristics of post-modern lamps and lanterns

1. Fashionable and noble

2. Advocating Nature and Returning to Nature

3. Warm and elegant, colorful

4. Prominent energy-saving effect, economical and practical

5. Unique sense of design can highlight the unique taste and uniqueness of the owner of the house.

Postmodern lamps and lanterns have modern style and classical style. They have a strong sense of modernity, but they are essentially different from the previous ones.

The Benefits of Postmodern Lamps

The change of the times makes people's life rhythm faster and faster. Many people even take mobile phones to work when they go to the bathroom. Post-modern furniture belongs to smart furniture. If an LED night welcome lamp can be installed in the bathroom and aisle, then it can properly reduce the pressure on the human body, warm themselves and warm up the pressure they are under. It is the charm of the intelligent lamp itself, a new sense of technology, a sense of the times and the environment we live in.

The difference between modern lamps and post-modern lamps is not very big. Post-modern is a transformation made by European art, which integrates many aspects of the trend, unique shape is the biggest attraction for customers, and also meets the consumer's pursuit of lamps and lanterns in design.

So from the appearance, they are similar to some brand lighting, the same appearance, people often choose the lower price. Little wonder, those products besides gold and jade, painting cakes to satisfy hunger. For a long time, all kinds of faults have appeared one after another. So when people choose to buy, they must wipe their eyes and choose carefully. In order to ensure their quality and make consumers get real goods and use them safely, some manufacturers of post-modern light customization brand will engrave the product logo on their respective crystal decorations. So if they choose to buy brand, they can only identify the product logo carefully when they purchase.

Postmodern lamp customization in a word is hanging in the lobby or restaurant of business travel, so we must be generous and pleasant to absorb the top of the post-modern lamp customization or hanging post-modern lamp customization. Postmodern light customization for different items is similar in appearance. It is worth noting that some of the criminal enterprises only do surface works. They install high-quality beads in larger post-modern light customization peripherals or obvious places, while the lighting interior or or shelter places are abundant.

Postmodern lamp

Postmodern lamp customization should be able to shine beautifully, the key is the purity of the crystal ball, cutting surface and lead content. Therefore, when choosing and purchasing a crystal ball, business travelers should check whether it has cracks, bubbles, water ripples and sundries. Only a crystal ball with transparent transparency can play a good role in optics and refract the passing light into beautiful colors. The cutting surface of the crystal ball depends on whether it can be smooth, whether the edges and corners can be distinguished, so that the refraction results of the crystal ball can be achieved from the lead content. Quantitatively speaking, all high quality crystal balls are made of lead crystal, which is a pure raw material and can produce beautiful colors.

Postmodern lamp customization is not only to send carbon in the snow, but also to add to the picture. It also depends on the size of the business environment and the appearance of the lights.

Through the combination of post-modern light customization and the surrounding environment, various situation results are produced. The selection of post-modern lamp customization must be based on the star and decoration style of business travel, and should be in line with the decoration style of business travel.

Postmodern lighting customization is often accomplished through two aspects, one is the matching of the model and the situation of the lighting commodity itself, the other is illuminating the lighting itself and the surrounding environment through the illumination of the light source.

With the development of our country's economy and the improvement of people's living standards, the original lighting commodities unique to some hotels are now the general trend of large families, becoming household jewelry.

Postmodern lamp decoration effect is generally completed through two aspects, one is the configuration of the lighting product itself and the matching of the situation, the other is the illumination of the light source to illuminate the lighting itself and the surrounding environment. After the post-modern lamp and the surrounding environment in accordance with make a variety of different situations. Postmodern lamps must be purchased according to the star level and decoration style of the hotel, which should correspond to the decoration style of the hotel.

With the development of our country's economy and the improvement of people's living standards, the original lighting products unique to general hotels are also in the general trend of families, becoming household jewelry.

Postmodern lamp

It is worth noting that some illegal manufacturers only do surface articles, they place high-quality beads on the periphery or obvious place of larger post-modern lamps, while abundant in the interior or or concealment of lamps. In this way, from the appearance, they are similar to some famous brand lamps and lanterns, the same appearance, people will generally buy lower value. Little wonder, those goods have their own appearance, painting cakes to satisfy hunger.

The development of post-modern lamp also promotes the development of general peripheral products, lamp distributors and lighting engineering companies.

Postmodern lamps should be able to shine beautifully, the key is the purity of the crystal ball, welding surface and lead content.

The flashy post-modern lamp not only can't send charcoal in the snow, but also can add to the picture.

For a long time, all kinds of defects have emerged one after another. So when choosing, we should always polish our eyes and choose carefully. Some famous brand post-modern lamp manufacturers, in order to promise their quality and let consumers buy real products and rest assured that they will engrave product marks on every crystal decoration, so if hotels choose famous brands, if they intentionally identify product marks when purchasing.

Nowadays, there are many professional post-modern light manufacturers in our country who supply lighting products for hotel investors. Besides, the post-modern light designers produced abroad are also seeking manufacturers locally, which also promotes the development of post-modern light in our country.

Therefore, when choosing and purchasing a hotel, it is necessary to check whether there are cracks, bubbles, water ripples and sundries in the crystal ball. Only the crystal ball which is transparent and transparent can give full play to the advantages of Optics and make the passing light refract beautiful tones; and on the welding surface of the crystal ball, it is necessary to see whether it can be slippery and whether the edges and corners can be distinguished, so that the refraction effect of the crystal ball can be obtained from the inclusion. As far as lead content is concerned, the usual high quality crystal balls are all lead crystals. This is a pure material, which can emit beautiful tones.

So when choosing and purchasing, we should wipe our eyes and choose carefully. In order to guarantee the quality of some famous brand post-modern lamp manufacturers and make the purchaser buy the real brand and use it reliably, they will engrave the brand logo on their crystal decorations. Therefore, if business travelers choose to buy famous brands, they only need to identify the brand logo carefully when purchasing.

Postmodern lamp

Postmodern lamp is usually hanging in the hotel or the lobby of the business traveler, so we must adopt a decent suction ceiling post-modern lamp or hanging post-modern lamp. Postmodern lamps of different brands are similar externally.

Postmodern lamps, which have no superficiality, can not add to the cake, but are in vain. It also depends on the size of the business environment and the appearance of the lights.

The reason why post-modern lamps can shine brilliantly depends on the purity of the crystal ball, the welded surface and the lead content. Therefore, when choosing and purchasing a crystal ball, business travelers should check to see if there are cracks, bubbles, water ripples and sundries. Only crystal balls which are transparent and transparent can give full play to their optical performance and make the passing light refract beautiful colors; and the welding surface of crystal balls depends on whether they are slippery or not, and whether the edges and corners are distinct, so that the refraction results of crystal balls can be obtained; and in terms of lead content, only crystal balls can be transparent and transparent. Generally speaking, all lead crystals are used in high quality crystal balls. This is a pure raw material, which can emit brilliant colors.

It is worth noting that some of the police violators only do surface works. They install high-quality beads on the periphery of larger post-modern lamps or obvious places, while the interior or or shelter of lamps hide their ears and steal their bells. So from the outside, they are similar to some famous lamps and lanterns, the same external, people often choose the lower cost. Little did you know that those commodities are beyond gold and jade. For a long time, all kinds of shortcomings have emerged one after another.

With the development of the national economy and the improvement of people's living standards, the original lighting products of a few inns are also the current trend of ordinary families, which have become household jewelry.

Postmodern lamp decoration results often go through two aspects to achieve, one is the type of lighting products and the environment, the other is to experience the light source to illuminate the lighting itself and the surrounding environment. Experience the basis of post-modern lamp and surrounding environment makes a variety of different environmental results. Postmodern lamp selection must be based on the star and decoration style of business travel to buy, and to correspond with the decoration style of business travel.